However, if that doesn’t work, it may be time to use a closet auger:
This will force water at some pressure through the toilet, hopefully unclogging the drain pipe. Place the plunger over the hole in the toilet and create a seal, before working it up and down vigorously. Plunging is the obvious fix for a clogged toilet. The most common location of toilet clogs is at the top of the tight, up-curving trap. Use a plunger to clear this simple blockage and then check that it is removed by running the hot water again.If it still seems blocked, debris may have settled into a loose blockage.Let the water run and check whether it drains.Remove the cable, replace the trap arm and trap, and turn on the hot water.If the cable gets stuck, go counter-clockwise with the crank and pull back on the auger to release it – and then crank and push forward again.Repeat this process until the blockage is cleared, pulling out another 18 inches of cable if necessary.Crank the handle clockwise while pushing forward.Pull out around 18 inches of cable and then tighten the lock screw.
Feed the cable into the stub out until it hits resistance (this is the blockage).Remove the horizontal trap arm protruding from the stub out in the wall.
To get to work with your cable auger inside the drain, follow these steps: Then empty the water from the trap into a bucket and make sure that the trap isn’t causing the clog. remove the sink trap with a pipe wrench or, if you have a PVC plastic trap, you should be able to unscrew it by hand. If the sink is still clogged, it’s time to venture underneath the sink.įirstly. For double-bowl kitchen sinks, block one drain opening while plunging the other one. Work the plunger up and down vigorously several times and then quickly pull it off the drain opening – this should clear most minor blockages.įor best effects with a bath sink, stuff a rag into the overflow hole while you plunge the drain opening.Most minor blockages can be cleared with a plunger.
0 kommentar(er)
